The miniature embroidery piece that I framed last weekend went together pretty well, so I thought I'd show you how I framed it, step-by-step. It was really simple, and very quick! Of course, I'm no professional framer or "finisher" - I've always thought it would be a worth-while thing to take a class in finish work. Either that, or to find someone who wanted to enlist as my "personal finisher." Ha ha. Anyway.... here's how I framed it.

The first step was finding something to mount the embroidery on. Ideally, a piece of archival mat board works great. And, as a matter of fact, I did have a little scrap of mat board left over from another project. I knew I wouldn't need much for this one, so it worked out really well.



Measuring the opening of the frame on the back, I subtracted one-eighth inch from the measurement to give me room for the fabric around the mat board. I cut the mat board to fit the opening perfectly, minus 1/8th of an inch. A regular utility knife or craft knife or X-acto knife works well for cutting mat board, and I just use my sewing / cutting mat for cutting mat board, too. The self-healing mats are great - not only do they serve as my base for cutting with a knife, but they serve as my ruler in practically everything!



To make sure the piece of board and the fabric would fit the opening in the back of the frame, I lined up the design on the little board and pushed it into the frame. It fit fine.



I finger-pressed the edges of the fabric around the mat board so I would know where to line it up as I worked. First, make sure your embroidery is exactly where you want it to be. Then, fold each edge of the fabric over the mat board, and run your finger along the edge, to make a crease in the fabric, marking the spot where you want the mat board to fit.

After doing that, I cut the excess fabric off the corners, straight across.



Then I folded two opposite sides over the mat board, making sure my embroidery was centered where I wanted it. With a double-threaded sharp sewing needle, I "laced" back and forth between the edges of the two sides of fabric, keeping the stitches fairly close together and pulling tightly so that the fabric was taut.

Then I folded over the two remaining opposite sides and repeated the lacing on those sides.



I didn't really like the way the corners turned out - they're so unfinished looking. I briefly thought of tucking in that little edge and re-sewing the whole thing with mitered corners, but then I remembered that no one would see it! There's a good quarter inch all around the embroidery that is hidden by the front lip of the frame. Besides, the tweaker you see there in the photo tucked to the back of the mat board just fine. So I left it.



Next, I fitted the embroidered piece into the frame, and when I was certain that all was lining up correctly, I started working on finishing the back. I should have filled the whole space in the back, but instead, I used a smaller square of mat board right behind the embroidered piece, and then one more square of mat board cut precisely to the size of the opening, so that it fit very snuggly into the frame opening on the back.



You can see there's still a good amount of space there. It would have probably been wise to go ahead and fill that with little mat board squares until the last piece was flush with the back of the frame. Probably, nothing will happen to it - but I still have visions of someone picking up the frame and giving the embroidery a good poke, which would dislodge it.



After fitting in the two pieces of mat board, I selected a pinkish piece of card-stock that matched the pink in the embroidery. It's an "ok" match, anyway - not perfect, but it's all I had on hand.

I cut a square of paper to the size of the back of the frame.



A tiny bit of glue fixed the decorative paper to the back of the frame to give it a finished look.



I suppose you can tell I went about this rather haphazardly, but the finished result is ok, I think. It's nice to have it done, anyway. I think I'd like to find a teeny tiny easel to put the frame on for display. At this point, it's just leaning against the base of a statue on the table in my entrance way. Kind of lost and small and dwarfed. But... I like it!

Now, it's time to move on to other things! I've been experimenting with something drawn-threadish, and I'm hoping to be able to show that to you tomorrow, depending on whether or not I get close-to-finished today! I'm also in the middle of trying to draw a design for an ecclesiastical project I'm supposed to be working on already. I can't quite get the drawing where I want it! Oh, where is my Muse??? And, then, once I get that going for real, I've got a couple other needlework-related ideas brewing (or at least half-way brewing - they haven't come to a complete boil yet!). Now, for the invention of the 36-hour day....

Labels: finish work, miniature embroidery, needlework pictures, needlework tutorials, pictures

Click here to read the whole post & comments.

Posted By: Mary Corbet on Tuesday, May 26, 2009
PermaLink  |  7 comments  | Click to Comment

Share this

A few months ago, I finished this little piece of miniature embroidery, and until this weekend, it's just been sitting around, waiting...

Earlier this month, when I went needlework shop hopping, one of the most exciting findings for me was a little square frame which I thought would be the "perfect size" for this miniature piece. It was $10, and, admittedly, I sort of cringed at paying $10 for a frame that was just barely two inches square...!

But... have you ever noticed that smaller things are sometimes pretty expensive?

And if you figure that miniature needlework can take just as much time - if not more - than regular-sized needlework, I think you'll discover a kind of value ratio there, somewhere.

Anyway, this past weekend, I did manage to put the miniature piece in the frame, and I had that little surge of satisfaction, knowing that I was actually right, that the frame was the perfect size.



The horizontal line running through the middle of the piece corresponds to a blank line in the middle of the flower and a slub in the fabric, just in case you're wondering.

After stitching on 28-count linen lately, I look at this piece (approximately 40 threads per inch - the whole piece is just about 1.5 inches square) and can't figure out how I saw those stitches without any kind of magnification...! Don't tell me my eyes are getting old, in just a few months' time!

I took this photo before finishing the back, and I've since slightly adjusted that lower right hand corner.

In a bit, I'll show you step-by-step how a framed the piece and finished the back of the frame. But for now, suffice it to say, I'm glad I've finally "finished" something! It always seems that anything I embroider these days gets put on hold and it never sees the finish line. I really need to stop doing that!

Happy Memorial Day!

Labels: finish work, miniature embroidery, needlework pictures, pictures

Click here to read the whole post & comments.

Posted By: Mary Corbet on Monday, May 25, 2009
PermaLink  |  10 comments  | Click to Comment

Share this

Posted By: Mary Corbet on Friday, March 06, 2009
PermaLink  |  1 comments  | Click to Comment

Share this

 

My miniature embroidery trial project is finished! Overall, I liked working on it - a lot!! As with most projects, now that it's finished, I can take a retrospective view on the experience and conclude that, sure, there are a few things I'd change if doing it again... but overall, I'm pretty happy with the wee thing.

For this little piece, I used 48 count Alabaster Angel from Legacy Linen. The design comes from a Sweetheart Tree kit I picked up while on vacation a couple years ago. In the original kit, the fabric was a 28 count pink checkered linen, which was to be stitched over 2 threads. If the piece were stitched by the kit directions, the final project would be between five and six inches square.

I used one thread of DMC in the colors recommended for the kit. Unfortunately, the beads included with the kit (Mill Hill Petites) were too large to include!



The finished size of the embroidery is just barely shy of 1.5" x 1.5". I used the tent stitch (half cross stitch) for the whole piece.



In needlepoint, which generally makes regular use of tent stitch, the stitches are generally always worked in one direction. However, I found that, when adapting a cross stitch design - especially one with different parts pointing in four different directions in the corners - it is acceptable, wise, a good idea, necessary even, to change the direction of the tent stitch... I figured that out a bit late with some parts of the design.



In the original kit, the inside of the parallel lines that make up the central diamond is filled with Algerian Eye stitch worked in white. I suppose I could have been a bit adventurous and filled in the diamond thus, but I liked it better as it is. I though the filling stitches would crowd the piece too much.

Now, for another treat, here's a photo Ginger sent of a miniature coverlet, stitched in surface embroidery stitches. She took the photo at a museum, where the curator allowed her to. The silver stitching and the silver lace on the edge are really nice, and I love the fact that it is all regular surface embroidery! What fun! Imagine the time that went into this tiny thing...



Thanks, Ginger, for sending the photo. I've replied in the usual place...! Sorry! I'm looking into getting that problem fixed!

I suppose most miniature embroidery is done for doll houses. I, on the other hand, intend to frame and hang this little piece, along with Christiana's sampler!

Speaking of framing miniature embroidery, here's an excellent tutorial by Larry at Wood'n Bits on making miniature frames for embroidery. He takes you step-by-step through making tiny frames which you can then mount silk gauze onto, and stitch, and, when you're finished stitching, you have a framed piece. It's a great tutorial. He continued it with another post on more miniature frames, which he sells - take a look!

And finally, speaking of silk gauze, once upon a time, I thought I had a link to somewhere online that offers 72 gauge silk gauze. Of course, I've lost the link... but to wonder if I imagined it? Does silk gauze come in such a fine mesh? Anyone know? and if so, would you happen to know where I can find some? I think I like this little stuff - not for looooong term, on-going embroidery, trust me! But for fun little projects, I like going micro!

Labels: counted thread embroidery techniques, embroidery resources, miniature embroidery, needlework pictures, pictures

Click here to read the whole post & comments.

Posted By: Mary Corbet on Wednesday, March 04, 2009
PermaLink  |  18 comments  | Click to Comment

Share this

 

In another 15 minute session with my needle and thread, I managed to accomplish a tiny bit of embroidery on a tiny embroidery project. As luck would have it, this 15-minute embroidery experience was nowhere nearly as productive as the last one!

Miniature embroidery has its drawbacks. The most noticeable one, for me, is the fact that it's miniature! Now, don't get me wrong - I like this project. It's fun! But on such a small scale, once the stitches are in, it's actually hard to see which direction the stitches are going. This wouldn't be a big deal, except for the fact that the four corners point in four different directions, and I quickly found that the design looked better if the tent stitches were altered to point in a certain direction, depending on the corner.



You can definitely see the problem with the center of the motif - I should have changed the direction of my stitching on the the right-hand leaf! I may take that out and fix it. (Then again....)

So, once again, here's a 15 minute segment of stitching. I took the above photo after setting the timer for 15 minutes, and when the timer went off, I stopped stitching.



I managed to get in the top of all the flowers in the light pink! I was so happy!

But then I realized that the stitching on the bottom right corner was done in the wrong direction! I didn't take it out at that point - I figured that would make a good job for another 15-minute segment!

Anyway, the little motif is coming along. I'll show you finished photos of it later on - with a ruler to give you a sense of size...

In the meantime, I've got a lot of work to do to catch up on a weekend that was insanely busy! I hope you had a chance to check out the goldwork peacock feather, which I didn't get a chance to post until later Sunday night. It's quite a beautiful piece of work!

Enjoy your Monday! And I do hope you get in a good 15 minutes (or more - lots more!) of stitching today!

Labels: 15 minutes, counted thread embroidery techniques, miniature embroidery, needlework pictures, pictures

Click here to read the whole post & comments.

Posted By: Mary Corbet on Monday, March 02, 2009
PermaLink  |  4 comments  | Click to Comment

Share this

 

When you have a hectic work week, how do you fit in your stitching? I often get questions like this one: "How can you work full time, make progress on your needlework projects, and still have time to blog every day? I don't even have time to get any stitching in!"

The truth is, I'm no genius when it comes to time management. I'm not nearly as organized as I'd like to be! But I do keep working on getting there! One thing that helps me make progress on anything - and especially on my needlework projects - is "chunking off" pieces of time. I mentioned before that needlework is my carrot; I use it as a kind of reward. I tell myself that, if I finish this chore or that project, I get 15 minutes (sometimes more!) with my needle and thread. I also make sure that, on most days, I do get at least 15 minutes to embroider. Of course, there are some days when this doesn't happen because life is too hectic! But on most days, if I plan right, I can get in at least 15 minutes of stitching or more, even if it's late at night.

Now, you may (and rightly) think that not a lot can be accomplished in 15 minutes. This is true! But 15 minutes here and 15 minutes there do eventually add up to real progress on a project.

To illustrate the point, here's a piece I worked on this week. It's the miniature embroidery that, early this week, I mentioned I wanted to start. I did start it, in a rather haphazard sort of way - I just plunged on in. (Plunging in has its disadvantages sometimes, but more on that later!)



With today's article in mind ("15 Minutes with Needle and Thread"), one morning before work, when I had everything ready for the day and still had 25 minutes before I had to leave for work, I set the timer for 15 minutes. Once the timer was set, I took out my embroidery basket. I got my camera and took the above photo of the piece. Then, I began stitching. When the timer went off, I stopped and took another photo.



Nope, I didn't get a LOT done, but I got something done. I finished the pink backstitching on the inside diamond and began the green, which I was pretty close to finishing.

Working under the 15-minute time constraint, I had to moderate myself in one regard: when working against the timer, I found I wanted to rush the stitching. But I controlled the urge, and stitched at a normal, comfortable pace, purposely ignoring the fact that the timer was running.

When the timer went off, I was sorely tempted to finish the last green edge on the diamond. Since I had to step out the door in ten minutes, though, to head for work, I put the work down. And this had a funny effect on me. I was super eager to get back to the piece - more eager and more enthusiastic about wanting to embroider than I usually am! This, in turn, had a positive effect throughout the day. I had something to look forward to that kept my interest vitalized in everything I was doing. It forced me to get things I needed to get done, done - and in an efficient way. No dawdling on the computer, no lingering over the mail wasting time at lunch, or anything like that. I wanted to get to my next 15 minutes, so I could finish that green line!

I often hear from other stitchers who say that needlework is a kind of "therapy" for them. I agree that needlework is indeed a balm for troubled spirits in this hectic world. I think that taking 15 minutes a day (or more, if you're blessed to have more time for it!) to climb out of ourselves and focus on being creative is a good practice. No, you won't start and finish a project in 15 minutes, but you will make progress towards the finish, and at the same time, you may find you've landed 15 minutes of relative peace and happiness!

So if you're frustrated by never having time to stitch, try to establish at least a 15-minute rule. Plan ahead and block out 15 minutes to stitch - whether it's in the morning before heading to work or in the evening before calling it a day. Maybe it's in the middle of the day on your lunch break at work, or right after you've put the kids down for a nap. Maybe it's while your dinner's in the oven. Just 15 minutes! I think you'll be surprised how much progress you can make on your stitching with just 15 minutes!

And now that I've been a good girl and written my blog post for the day, guess what? Right! I get 15 minutes with my needle 'n thread! Bye!

Labels: miniature embroidery, miscellaneous embroidery musings, needlework pictures, organization, pictures

Click here to read the whole post & comments.

Posted By: Mary Corbet on Saturday, February 28, 2009
PermaLink  |  7 comments  | Click to Comment

Share this

 

I love working on the whitework embroidery sampler! Exploring the different drawn thread techniques has been fun, and I'm itching to start on some other techniques, such as satin stitch over trailing. But, as with every long, slow project, a break is a good thing! So I'm going micro...

A while ago I showed you this unbelievable miniature embroidered sampler, remember?



I've really fallen in love with the little thing - the more I see it, the more I like it. I'm planning on having it framed in a regular frame, with a tiny hole in the mat...

So, here I've been, mulling this idea of miniature embroidery over in my head.

I know it isn't anything new - some people apparently do miniature embroidery for the fun of it, with no distinct purpose. They like it, like I like goldwork. Others create little miniature projects for doll houses. Still others like the notion of petit point on silk gauze (which I'm dying to try - on 72 gauge!). There are plenty of miniature embroidery books on Amazon.... though some are apparently just "small" motifs stitched on regular fabrics. So I know I'm not talking novelty here.

But for my 'break' from the whitework sampler, I decided to go micro, and see about this miniature embroidery thing. This has forced me into an area of needlework that is not necessarily my favorite - I don't particularly care for (sorry!) counted cross stitch! Oh, don't get me wrong - there are some counted cross stitch items these days that I find really attractive and that I think would be great fun to work. I like the historical samplers, and the Quaker look, and I really like some of the Long Dog samplers - they're pretty neat. But my stitching preference isn't counted thread techniques. (I suppose you probably already know this if you've been reading my blog for a while!)

Still, I think it's worth venturing in for a try. First, I'll try counted. Then I wonder what it would be like to go micro with regular surface embroidery. Teeny tiny - super-duper-tiny - surface embroidery stitches on a wee sampler might be something worth trying.

But, for now, I'm counting. I selected a design that I have from a Sweetheart Tree kit I bought a few years ago when I was on vacation. Then, I picked out some linen. The choice was between two linens: Legacy's shadow work or Legacy's alabaster angel. Alabaster angel is 48 threads per inch. Shadow work runs around 56 threads per inch (I counted approximately 7 threads per 1/8 inch). I stuck with the alabaster angel for this first project. The shadow work linen doesn't have much "body" in the individual tiny threads - it's a relatively sheer linen with space between the weave. This is nice, but I wanted to make sure the stitches were duly supported. Plus... well, truth is, on the very sheer fabrics, you really have to be concerned with the back as well as the front, and I will admit it - I didn't want to bother so much about the back! (Tsk, tsk! Shameful, I know!)

With this miniature embroidery stuff, especially on fabric that's 48 threads per inch, a full cross stitch is too much when working with one strand of regular cotton floss. So the half cross stitch is what I'm using - tent stitch.

I've run into a couple little problems:

1. My needle is very small. Tiny needles have a tendancy to sink into the side of my thumb and cause the skin to split. *sigh* And it hurts like the dickens. Perhaps I should consider a "thumble" of sorts.

2. Tent stitch normally works pretty well when translating from a cross stitch desigh, but it doesn't always work. Because of the one-way direction of the stitches, certain parts of the pattern become a bit disjointed, when they shouldn't be. In some areas of the design, this is easily resolved with stitching in the opposite direction, though I realize this just "isn't" done in petit point, from what I understand! In fact, the design has quite a few half cross stitches indicated, as well as the direction in which they should be worked. So it does help to change the direction of the stitching to fit more with the design.

3. The design relies heavily on beads for accents. I don't think they make beads small enough! The Mill Hill petite glass beads loom over the stitching like giant doughnuts!

4. I made the funniest (most ridiculous) stitching mistake ever. Well, I think it's funny! Perhaps most people won't notice it, though, so I'm not going to mention it now. I'll wait for the photos. Even then, I might leave you to guess!

The design itself is normally over 5" square, when stitched according to directions on the little kit it came in. With the fabric I'm using, it's just barely 1.5" square.

Now, the nice thing at this point would be a photo.... but not yet! Look for it later this week. I'd like to finish the whole piece first.

Other than this, I'm DEFINITELY setting up a little (little, but not this little) goldwork project this week. Christiana sent me some photos of a beautiful little piece of goldwork (Or Nué) that she's been working on, involving a peacock feather, and I just can't stand it anymore! I must set up a project! And so I shall. I might even do a feather of sorts, too. Maines des Merveilles has a beautiful issue full of feathers, and I've never had a chance to do anything with them. Christiana's is really beautiful, and as soon as she gives me the okeedokee (she made it as a gift...), I'll post the pictures.

All that being said, I'm still enjoying the whitework sampler.

Don't forget to sign up for this month's embroidery stash give-away if you haven't already - 12 different types of embroidery threads to try out! I'll announce the winner tomorrow.

Enjoy the day - hope you have time to get some stitching in!

Labels: counted thread embroidery techniques, Embroidery Projects, miniature embroidery, sampler

Click here to read the whole post & comments.

Posted By: Mary Corbet on Tuesday, February 24, 2009
PermaLink  |  13 comments  | Click to Comment

Share this