Before Easter, I was playing around with the idea of embroidered Easter eggs. Thing about it - spring colors, Easter egg decorations - a great combination for fun embroidery (and something I thought the kids would like!) Because of time constraints, I didn't get very far, but I thought I'd show you what I threw together and how easy it can be to stitch on a stuffed anything.

The Easter egg - which actually looked more like a football at first - is made out of some wool remnants I had lying around. I cut out four marquis-shaped sections, using two colors. Taking one of each color, I sewed them together, right sides facing, then I did the same with the remaining two colors, then placed the two sewn together pieces right sides facing, and sewed those together, leaving a little turning hole in the last seam. All this was done by hand - it would go a lot faster by machine and would look a heck of a lot better! Anyway, this was just an experiment.

Next time, by the way, I'll use six sections and hopefully the finished product won't remind me of a kid's stuffed football!



This is the egg, with a few layers of embroidery worked on it. Next time (next year?) I'll work a few more rows and do something more elaborate with the tips. The possibilities are really endless as far as the embroidery goes - you could get really elaborate with something like this! Beads, ribbon, a variety of stitches...



From top to bottom, I used fly stitch, double feather stitch, herringbone, daisy stitch and French knots, and buttonhole wheels.



Embroidering on a stuffed figure is pretty easy, actually. You begin with a knot in the end of your thread, take the needle in some distance away from where you intend to start...



...wiggle the needle around a bit in the filling, then pull the thread through, so that the knot catches inside the filling and secures the thread.



Work your stitches in a "sewing" method - that is, taking the needle in and out of the piece in one swoop - and then, when you get to the end of your stitching, anchor the end of the stitch as you normally would....



...bringing the needle either out in a seam, or out underneath a stitched area...



...and take a small securing backstitch, to anchor the thread. It's best if this can be done in a seam, where the backstitch can't be seen, or, again, inside some stitched area where it will be hidden.



Bring your needle out of the stuffed figure anywhere, and cut the thread close to the surface, pulling a bit on the thread so that, when it's cut, it is pulled into the inside of the stuffed thing.



See! It's gone. Wow. Those seams are really ugly. A sewing machine will eliminate that messy look, I think!



You can see here a view of the egg on a "corner." To ensure relatively straight paths along which to embroider, I first used regular white thread and basted a running stitch line around the egg. Once the line was embroidered, I cut the white thread and pulled it out. You could probably even use something like a fabric masking tape to mark the line and then baste, to get a really straight line.

I'm pretty sure I'll do this again, but next time, I'll make a pattern for a six-panel egg, and I'll use a machine to sew up the seams. I suppose any fabric would work - wool felt would probably work great!

Another option would be silks and brocades and fancy fabrics, for a dressier look. And, of course, you're not limited to egg-shapes. You could do spheres... think Christmas ornaments and so forth. I'm contemplating a similar project for my kids' embroidery classes this year.

So that was my stuffed egg adventure. I love the colors! But now that Easter is over, I think I'll move on to other needle 'n thread adventures!

Labels: embroidery tips and tricks, holiday stitching, needlework pictures, pictures, wool felt

Click here to read the whole post & comments.

Posted By: Mary Corbet on Friday, April 17, 2009
PermaLink  |  8 comments  | Click to Comment

Share this

Yesterday, I was sitting at lunch with my mom, perusing the ridiculous influx of magazines that pour, unsolicited, into her mailbox this time of year. I came across a line of wool felt table settings that caught my eye in one of them - and I looked at the price tag and said the same thing I say every time I look at similar items: "You could make this a lot cheaper!"

The "Do It Yourself" mentality is nothing really new, but in the past decade, I think the drive to get creative and make things has gained greater impetus. For those on limited budgets, the urge to Do It Yourself may be initiated by the desire to have certain types of items found in the retail world that exceed the limits of the purse strings. For others, the DIY mentality is a way of life - a principled stand against some facet of manufacturing or commercial enterprises. For some, they do it themselves because they know they can do it better.

When the DIY urging inevitably overtakes me this time of year, I have to remind myself of a few things .... so I tell myself the following:

1. You can't always DIY less expensively, but you can usually do it yourself better, simply because you can pay attention to quality of materials and workmanship that are often overlooked by commercial enterprises. So if you are going to put the time in to make it, then don't do a rush job, don't waste materials, use good materials, and make something that will last.

2. You can DSY (do something yourself) less expensively, if you pay close attention to your needs and your wants. If you don't Neeeeed it, you don't need it. So don't make it. Make something else! If you must "create," then create something you can afford to create. Re-use, dig into stash, etc. Forget the catalog ...

3. When you set about to improve upon something you've seen or to imitate it, add your own twist - at least take the source of inspiration up another notch to make it more "your own." If I'm going to imitate something and make it myself, I'd rather people not equate it automatically with something bought from a retailer.

Ok, all that being said... this DIY idea has GOT to be cheaper.... It's a good source of inspiration that I think could be adapted a bit and even improved upon.

The catalog was Williams-Sonoma, and the items are a table runner, placemats, and a tree skirt made from a red felt blend (read that correctly: probably 20% wool, 80% acrylic ... it was on sale at the local fabric shop off the bolt last week for $6.99 / yard) backed by white fabric. There's a cut out design in the red felt so that the white shows through.



These cutwork felt items from Williams-Sonomoa are rather striking, I think. I'm not exactly sure I would decorate my Christmas table with felt, especially at $60 for the equivalent of less than a yard of fabric for the runner (you'd probably have to buy more than that, to get the length in one piece, if you wanted it in one piece - unless you'd settle for a 72-inch runner as opposed to a 90-inch).



Zooming in on the pieces, they're just cut out ... there's no re-inforcement or anything on the cut edge. It's a clean cut - felt is great for that. A little template, a craft knife or small sharp scissors (I prefer the latter when working with felt), and you're all set.



There's also a 56-inch circular tree skirt for $89. Let's see... 72" wide on that felt blend from the local fabric store... so, two yards to make a 56" circle.

I suspect the white fabric is nothing too fancy-schmancy. Just cotton or a cotton-poly blend.

Anyway, this is, surprisingly, the only thing I've seen in any of the hyper-abundant, unsolicited magazines filling the mailbox lately that strikes me as something worth imitating. I'd probably change the cut-out pattern. And I probably wouldn't make a table runner and placemats. But little Christmas stockings for the tree or for gift-giving? Little gift bags? Ornaments? Yep. But you do realize there's something missing? Oooooh yes.... I'd definitely add some embellishment - just a touch of embroidery, in the right spots. It might take away from the clean-cut look. But, done right, it just might add the perfect touch.

So my mind is chewing on ideas for that. I may have already mentioned that this year is entirely a hand-made Christmas on my part, for three reasons: 1. I think it means more, though I may have a hard time convincing my younger nieces and nephews of that! 2. the budget; 3. I thought it would be, somehow, an interesting challenge for myself. Yes, well. I may regret #3 eventually!

My questions for you.... What are your thoughts on the DIY approach?

Do you consider yourself a Do-It-Yourselfer? (I know some very creative people who are not remotely DIYers!) Where do you take your Do It Yourself inspiration? Do you find it's less expensive to DIY (not taking into account the time spent)? If you are a DIY-er, why do you Do It Yourself? Any thoughts?

Labels: Christmas, gift ideas, wool felt

Click here to read the whole post & comments.

Posted By: Mary Corbet on Thursday, November 06, 2008
PermaLink  |  14 comments  | Click to Comment

Share this

A while ago, I started a random embroidery project on a piece of felt. My original plan was to use it as some kind of book cover, or needle book, or ... something. But the truth is, initially, it was a spontaneous project that I grabbed just to have something to work on while on a short road trip. The piece developed, and then sat neglected for a long time. I've finally done something with it.

I didn't know exactly what I wanted to do with this bit of embroidery. Really, I couldn't picture it as any certain thing! When I wrote about the piece a few weeks ago, I got a lot of excellent suggestions for how it could be used. I ended up going with a large-ish needle case / tool holder.

The reason I dug the piece out recently to finish is that I had some threads and needles to test. If you read my posts on the Spiral Eye Needles and on Soy Luster thread, you saw parts of the finish work for the piece.

The first thing I did was determine how I wanted to make a cover. Fortunately, when I cut the felt, I left long sides that would turn in to back the two finished panels. This worked out well. After trimming, I folded the felt to the back of the embroidered panels and fused them closed.



And yes, the back is MESSY!!!!

I trimmed a little more, then buttonholed the edge of the cover all the way around.



Then, I had to think out how I would finish the inside. I cut out a piece of left-over blue wool felt to cover the inside, and then started laying tools on the piece to find out how I could arrange things.



I noticed that, with scissor or tool slots, I would have to either put a loop or a flap on them to hold the tools in, should the book be turned upside-down. So instead, I decided to face the tool openings towards the inside fold of the book.

I made two tool holders - one for scissors and the other for either another pair of scissors, or tweezers and a laying tool (I haven't really decided what, exactly). I figured I could put three flaps for needles on the other side, using some other scraps of felt. The whole inside of the book, in fact, is done in felt scraps. I had to rummage a bit to find pieces that would work.

There was still a bit of room between the needle flaps and the center fold, so I decided to attach a large thread ring there. The mother-of-pearl thread ring doesn't really match the "rustic" look of the book, but it'll do.



I cut out the shapes of the tool holders - a V-ish shape for scissor (in the sheath) and a rectangle for tweezers and laying tool. Incidentally, the rectangle was a scrap from this past summer's bookmark project in my kids' embroidery classes, and it worked out just fine.



Then, I began embellishing the tool holders.



I stitched free-hand, whatever occurred to me as I went.



I used a combination of threads - perle cottons, DMC stranded, Soy Luster, floche, and silk. Most were taken straight from a tub of stashed threads that are somewhat disorganized, with the exception of the Soy Luster and Baroque Silk, which were both new and which I was trying for the first time.



I had fun embroidering these little things. Because they are small, I wasn't stuck doing any one thing for very long, and because they were completely free-handed, I could do whatever came to mind.



I liked working with the variety of stitches and threads.



After finishing the tool holders, I attached them to the blue felt using buttonhole stitch all around, facing the openings (as previously mentioned) towards the inside fold to keep the tools from falling out.



Then I embroidered on the needle flaps, using a few different stitches to secure the flaps - herringbone stitch is on the top flap, chain stitch on the middle flap....



And fly stitch is used to attach the last flap.

I attached the thread ring using a tiny scrap of ribbon I just happened upon in my floss box.

Once I had everything attached to the blue felt that would serve as the background to the inside of the needlecase, I attached the blue felt to the book cover using buttonhole stitch all the way around. I found that the blue felt needed to be attached to the cover in the middle of the case as well, to help it fold better, so I ran two lines of running stitch down the center. I worked these through all the layers of wool felt (three, total), so that they are visible on the outside cover as well, just at the border of the embroidered panels.

Unfortunately, I didn't draw the lines and measure things out before I started stitching, so the lines are actually not quite parallel. They run away from each other towards the bottom! After working the running stitches, I whipped them to give the line a more finished look. Anyway, with the stitched lines in the middle and the and the top and bottom edges secured with the buttonhole stitching, I was left with an unstitched edge on the outside of the blue felt, which created the perfect opening for pockets that can hold extra thread or other flattish things:



In fact, it's nice having these two pockets on both sides of the case.



Then, once all was done, I had to have a way to close the case. I was out of ribbon, so using two strands of a coordinating perle cotton #5, I twisted the threads until they were suitable for a cord, and then made little ties out of them, which I attached at the edge of each cover.



In retrospect, if I were doing something like this again, I would not make a needlebook or tool case that closes in this manner - I'd make a flap that can button over the whole thing. The one thread in the middle seems somewhat chintzy, but, still, it ties the thing closed, and for this project, that will do.



Overally, I had a lot of fun working on this little project, though after a while, my fingers were killing me from working through multiple layers of wool felt and a layer of fusible interfacing.

I actually don't know if I'll ever USE the case. I'm thinking about giving it to one of my embroidering nieces for Christmas.

It was a fun project, so I'm not opposed to making another modified version with a different closure and a different layout on the inside. We shall see, we shall see! What think you about it? Any suggestions for a better way to close the thing up? I'm all for pointers, so point away!

Labels: Embroidery Projects, Hand embroidery stitches, needlecase, needlework pictures, pictures, threads, wool felt

Click here to read the whole post & comments.

Posted By: Mary Corbet on Tuesday, October 28, 2008
PermaLink  |  25 comments  | Click to Comment

Share this

 

Usually, my embroidery classes for kids end when the summer comes to a close, and I don't really think about children's embroidery projects again until the following spring. But that changed this year, with the phone call of a friend.

I have a friend who is a teacher's aid for a fourth grade class of 29 students. She thought it would be fun for the kids to do a little embroidery project for art class, so the other night we met and bounced around some ideas, using scraps of felt and bits of thread leftover from last summer's classes.

Since she's thinking the project would be good for the last three weeks before Christmas break, we migrated towards the idea of little individual tree ornaments made out of felt.

I didn't have a lot of felt on hand, since we used it up last summer, but I did have a length of dark brown wool felt that served for mucking about on. This is what we managed to stitch up while we were discussing possibilities:



The colors are not, overall, too appealing for fourth graders, but that can be adjusted. But the concept is there: basic embroidery on the front in a cute design (not necessarily this one!) backed by a second piece of felt, and buttonholed all around. Simple enough.



We only used three stitches, really: whipped running stitch, daisy stitch, and buttonhole or blanket stitch around the edges.

But this is the thing...

My friend has never (that's right, never) embroidered before! So ... not only will this be a crash course in simple embroidery (she won't have a problem with that), but also a bit of a crash course in how to organize for such a project and how to teach it in a logical and ordered way to a class of 29.

These are some of the pointers I've given her:

1. Limit their options. As we were talking and enthusiasm was abounding, we came up with all kinds of possible shapes for ornaments: gingerbread folk, houses, trees, hearts, ornament shapes, simple bird shapes, simple flower shapes, etc., etc., etc. Oh, I agree they'd all be cute... but with 29 students on a first-time project, limiting the students' choices will help minimize confusion.

2. Limit the number of stitches for instruction, and keep the stitches simple. I suggested instructing on no more than four basic stitches.

3. Limit the number of colors for the projects - again, I'd limit them to four.

4. Pre-design the ornament, drawing out the design on it. This is where there can be some variation - draw different designs on the ornaments, so that they aren't all exactly the same. This will give the students a sense of individuality, but it won't leave the burden on them for deciding "what to do" on their ornament. If the designs are pre-printed on the fabric, they can start on the projects a whole lot faster!

5. Plan everything well in advance. Make sure all supplies (felt cut-outs, threads, plenty of needles, etc.) are all on hand, and divide up a little package or kit for each student. Use zip-lock bags, so they have something to keep the project in. Plan the instruction out in step-by-step increments, allocating enough time to each step.

6. Print out a picture diagram for each stitch, and give a photocopy of each to the students. Maybe even make blown-up copies of the diagrams to use while instructing on the stitch. If they can look at the diagram as you walk them through it, then they'll be able to understand the diagram better and can refer to it for help on their own (whether at home or in the classroom).

7. Plan for small group instruction. While the whole group is occupied with a task, break off into small groups to give more individualized instruction.

8. Make sure to plan in enough quiet stitching time, in which you can circulate and help individuals, and in which the students can get the "rhythm" of the stitch down.

9. Although there will be two instructors in the room, perhaps consider finding one other assistant to help out. 29 first-time little stitchers will have lots of unthreading needles!

So those were my recommendations. I'll be teaching her the basics of embroidery over the next couple weeks, and we'll narrow down ideas and make supply lists for this series of embroidery classes.

My question to you: Any other suggestions for this venture? Or any alterations on my suggestions above that you think would be helpful?

I'll keep you posted on how it goes!

Other news:

If you haven't signed up for my October stash give-away, don't forget! The deadline is Tuesday morning, 5:00 am my time. See the details on the original post.

In Country Bumpkin's e-mail newsletter that I received this morning, they also mentioned the advantage for overseas shoppers that I mentioned yesterday. A year's subscription to Inspirations is averaging just over $50.... much better than $70 and higher, so it really is a good deal!

Enjoy the weekend!

Labels: beginner embroidery, embroidery for children, needlework pictures, pictures, wool felt

Click here to read the whole post & comments.

Posted By: Mary Corbet on Friday, October 10, 2008
PermaLink  |  5 comments  | Click to Comment

Share this

 

A couple years ago, I wrote about a random sampler that I began on a road trip. Lost in the labyrinthine oblivion of my website, I didn't even have the post available in my gallery. But you know, I liked this piece.

I remember the pleasure I had working random stitches all over the place, doing whatever occurred to me, using whatever thread. There's a real pleasure in that. It's just so... random.



I also remember having specific plans for the piece. Hahhahahaha.



It has nestled, neglected, in a basket of other neglected scraps, trials and errors.



But today, I'm resurrecting my Random Sampler! I'm going to go look at it again. I'm going to see if I can make something of it. I'm going to decide if I like it as well in person as I think I remember. And then... if I do, I'm going to finish it into something.

I have no idea what.

Along with that plan, I've got a list of to-dos about half a page long. Six of them are needlework & blog related. Seventeen of them are not. I'm not sure why Saturdays are so short...

Some of the needlework and blog related activities:

I'm planning the long and short stitch "classes" or lessons still. I have decided to take Joey's advice, and work an individual motif at a time, rather than a whole project. And in fact, I'm arranging individual motifs into a sampler of sorts, so I'll be showing you that soon.

I've got to edit a few videos. I don't even want to think about it!

I have to clean up the studio and get it ready for a guild meeting Monday evening. In the process, that's when I'll pull out the Random Sampler.

I will be planning my Saturday afternoon sessions - I'm going to do some Christmas card sessions with the kids on Saturdays over the next couple months, and I'd like to get that going next weekend. I can't do that without proper planning. So I plan to properly plan today. Besides using designs I already have from books and online sources, I have several card patterns (embroidered cards, you know!) bouncing around in my head. They need to come out on planning paper, and then they need to be tested. So that's something I'll be writing up.

I must, today, finish the goldwork project I'm working on. I've got to get it in for framing, since it's a wedding gift and I want it finished on time. So I will finish that today. And take photos....!

I must clean, organize, line up - all the related activities associated with getting ready for upcoming projects. For example, I have to pick out the stitching on the baby booties and get the supplies put together for those and packed into a bag, so I can work on it when time allows and everything will be at hand. I need to assemble all my threads for the Pelican (and that's a good thing, because I have them scattered hither and thither).... oh, bother. This is going to be my "junk drawer" category for the day.

Ok. You're right. I need to face reality: What can I actually accomplish today? I suppose we'll have to see!

.... I'm thinking I should skip doing laundry ...... and do I really neeeeed to vacuum? Heh heh heh.

Have a great weekend!

Labels: beginner embroidery, needlework pictures, pictures, sampler, wool felt

Click here to read the whole post & comments.

Posted By: Mary Corbet on Saturday, September 27, 2008
PermaLink  |  11 comments  | Click to Comment

Share this