Mary Corbet

writer and founder


I learned to embroider when I was a kid, when everyone was really into cross stitch (remember the '80s?). Eventually, I migrated to surface embroidery, teaching myself with whatever I could get my hands on...read more

Contact Mary

Connect with Mary



2024 (73) 2023 (125) 2022 (136) 2021 (130) 2020 (132) 2019 (147) 2018 (146) 2017 (169) 2016 (147) 2015 (246) 2014 (294) 2013 (294) 2012 (305) 2011 (306) 2010 (316) 2009 (367) 2008 (352) 2007 (225) 2006 (139)

The Dublin Craftlite Magnifier-Light Combo: Review


Amazon Books

Yesterday, I mentioned that new phase of life, wherein eyesight just isn’t what it used to be! And this can really affect the pleasure we get out of doing our needlework. Having reluctantly entered this phase of life, I recently purchased a Craftlite “Dublin” magnifier-light combination, so I thought I’d give you an in-depth review of it.

Craftlite Dublin Magnifier-Light for Needlework

Well, here’s a rather weird shot – but it was dark in the room, and I thought I’d see if I could get a photo of the magnifier / light, with my work behind it, to show you the light. You can see that the light is pretty bright, but the photo doesn’t capture the experience very well! Still…. just to show you how these things work, in case you don’t already know: in the head of the apparatus, there’s a circle of LED lights around a magnifying lens. You position the magnifier-light between you and your needlework, with the lights shining down on your work, and you turn it the thing on, and you look through the lens as you work.

Craftlite Dublin Magnifier-Light for Needlework

The photo above is the manufacturer’s photo. It shows you, pretty much, what the Dublin is all about. The Dublin is both a floor model and a table model. If you remove the straight shaft of the floor lamp (very easy proposition – it is fitted in the base and tightened in with a screw knob), you can take just the goose-neck part of the lamp and fit it into the base, to use as a table-top version. The Dublin doesn’t come with the clamp that you see above, but the clamp attachment can be purchased separately, if you want a table-top model without the “footprint” of the base.

Craftlite Dublin Magnifier-Light for Needlework

The goose-neck on this thing is super-dee-duper adjustable. I can position the magnifier in any way I want it. I’m sure I probably have tried every possible position, just to see what it would do. I think an easily flexible arm like this is important for a magnifier. Whenever you switch positions, you shouldn’t have to un-tighten things and reposition, and re-tighten things, to get your magnifier where you want it. You also shouldn’t be limited in the positions you can sit, because your magnifier isn’t flexible. So I’m pleased with the function of the goose-neck.

Craftlite Dublin Magnifier-Light for Needlework

When the lens head is horizontal, you can rotate it so that the lens faces your face, if you want. That’s how flexible the thing is. And the lens head is very light, so it doesn’t ease back down out of position, as heavier models might.

Craftlite Dublin Magnifier-Light for Needlework

The new version of the Dublin has a battery pack that can be used when a plug isn’t readily available. It takes “C” batteries, and I’m told that they last quite a long time, since the LED lights don’t pull much on them.

The battery pack can be easily positioned on the straight shaft of the floor lamp model, or, if you’re using it as a table lamp without the shaft, it clips right on to the base ring of the goose-neck. I haven’t used the battery pack yet, but I can see how it would be handy. Not that I’d take the thing in the car with me, but travelers who camp and so forth might find the battery pack very useful.

Craftlite Dublin Magnifier-Light for Needlework

The lighting is provided by this ring of LED lights, which shine a bit “blue” but really brighten up your work. If you’re using white fabric, it looks shockingly white at first. The LED lights are very bright if you are looking directly at them, but since you don’t look directly at them, as they are pointing down from your face or away from your face when you’re working, this shouldn’t be too much of a bother. As with any very bright lights of this nature, you don’t want to spend any time looking directly at them, especially at close range. If you stitch in a room with another person, you might need to adjust the position of the lens head so that the lights don’t bother the other person, either. But in fact, from a distance, they are not as noticeably bright.

Craftlite Dublin Magnifier-Light for Needlework

The whole thing, when in floor-stand mode, is very light – much lighter than most Ott lights and so forth that come with a base like this. For example, the base on the older Ott lights with the goose-neck arm are Really Heavy – drop it on your toe, and you’re doomed! – but the light itself is heavy, so the weight is needed to balance the light. With the Dublin, the whole thing together is not heavy at all, but there’s enough weight in the base to keep the magnifier stable. And yet it’s still light enough to move it around with ease.

What I like about The Dublin Craftlite:

1. I love the very flexible goose-neck, and the fact that I can easily move the lens head into any position I would want.

2. The quality of lighting from the LED lights is better than I thought it would be, so I’m actually very pleased with the brightness of my work under the magnifier and light.

3. I like the fact that it can be a table-top or a floor model, with a simple adjustment. I’m the type who pretty much will stick with the floor version, but if I ever want a table-top version, it’s just a matter of removing the straight shaft.

4. The battery pack is a great idea, especially for folks who travel or camp. I can see using it in a hotel room, where an electrical outlet isn’t easily accessible. But for at-home use, I don’t really have need of the battery pack, which brings me to the cost of the thing (under cons below).

5. The whole thing is light. It’s stable, though – it doesn’t wobble about, and it isn’t easily knocked over. The base is heavy enough to ensure that, but not too heavy to be inconvenient to move around.


1. The thing is somewhat expensive, clocking in around $110.00. Why isn’t there an option for “just” a table lamp version with the goose-neck, that is less expensive than the table-floor combination? Or, why not make the battery pack optional (as a purchasable side accessory), since most people probably won’t use it that often – and maybe shave off a bit of the price for the thing overall?

2. I wouldn’t mind the lens head being a bit bigger, but I know that this would probably increase the weight of the head, which would limit the staying power of the flexible goose-neck, and increase the weight in the base, so… I won’t complain. The lens is big enough to do what it needs to do, I suppose!

3. If you need very strong magnification, this magnifier might not do it for you. Magnification is 2x, as opposed to the larger, heavier magnifiers, which are generally around 5x magnification. But if you’re just creeping into that area of needing a little magnification, the Dublin will probably do the trick.

So that’s the Dublin by Craftlite – combination magnifier and light. And overall, I really like it! If you’re looking for one, check out your local needlework shop first – they may carry it. If you don’t have a local needlework shop and need to find it online, you can find it through online sources, such as Keepsake Needlearts. (No affiliation… just looks like they carry it regularly…) For anyone out there in Kansas, I bought mine in Topeka at the Sunflower Seed (Huntoon & Gage Blvd). Call first before you make the trip, as they might not be in stock.

And don’t forget to add it to your Christmas List!


Leave a Reply to Bobbi Cancel reply

Your email address will not be published. Required fields are marked *


(26) Comments

  1. Does this light emit much heat? Or don’t LED’s do that? Thanks for the good report. For a floor standing model, the price tag really isn’t “that bad”.

  2. OMG!!! It looks perfect.
    Unhappily I couldn’t found any European site with this…

    Off topic: have you already heard about Tassen Museum Hendrikje / Museum of bags and purses at Amsterdam? I’m sure you do. I’m so lucky I had been there a few weeks ago! It’s amazing

  3. when i first opened this newsletter i saw the photo and thought you hade made this embroidery into a handbag. it looks like a round handle with your work as the front flap. i really like the concept and may try it myself.

  4. A couple of hints regarding gooseneck use:

    1) They can wear out over time, no matter how light the thingie on the end is.

    2) To help keep the wires happy inside that oh-so-flexible neck, use a marker when it first comes out of the package (or when it’s as ‘original position’ as you can get it) and make a line down the back of the gooseneck.

    That way you can untwist any accidental twists in the interior wiring….and they won’t shorten up and get pulled free, that way. 🙂

    Have fun!

  5. I have a similar magnifier with light on a floor stand (does not have the table top option), purchased at Wal-mart for just under $100.00 (Cdn) a couple of years ago (2008 I think). I LOVE it!! At the time I was stitching a cross stitch moon light scene (mostly dark threads) on 18-count fabric. My nearly 60-year old eyes were having issues and that solved it. My sister has since invested in one as well. I find I have to turn off my Ott light on the other side of my chair as it causes a reflection, but the LED lights more than compensate for it.

  6. Hi Mary,

    I wanted to let you know that my husband gave me this lamp for Christmas. He purchased from Keepsake Needlearts. Unfortunately, the bracket for the battery pack was broken and we anticipated that we’d have to pack up the lamp and send it back. However, the really nice customer service agent at Keepsake arranged for the manufacturer to send me a new pack. It arrived in the mail the other day. So, I definitely recommend Keepsake Needlearts for purchases. And I can’t wait to use the lamp!

  7. Thanks for the review!
    I was wondering how this worked for your farsighted niece. My husband has the same vision issue and does a lot of close work.

  8. Hi from South Africa, I have been using this lamp for about a year now and just love it. I really enjoy the fact that when doing a course or lesson you can take it in what ever form and use it with batteries. Obviously I had to purchase it from the UK, but it was worth every bit I paid for it.

  9. I saw this lamp in a catalog and searched online for reviews. Thanks for your thorough review of the lamp. Now that you’ve used it for a while, how did it hold up?

  10. Thanks for a penetrating review of this light. I have been searching the internet for a few months now, and I think this is The One. Cheerfully, Carol

  11. Mary, Thank you for the many years you have been blessing the needlework community with your vast knowledge and wonderful expert talents.

    The Internet is all over the place with not so good information about lighting. I know that you have from time to time shared your advice on lighting that is excellent for those of us with eyesight that loves to play tricks on us. I notice that about 3-4 years ago you began to recommend the Dublin Craftlight
    as a good floor lamp magnifier. You also recommend the Blu Max.
    Would it be possible for you to give us an update on lighting? I want to be able to sit in an east chair or sofa and stitch. Thank you!
    PS. I am returning an Ott Lite floor craft lamp that was good for sitting at a table, but horrible for sitting a chair.

  12. Mary, I have the Dublin light/magnifier and want the battery pack so I can use my unit at seminars without all the trailing cords. Do you have just the battery pack set up? Kay Keach

    1. Hi, Kay – I’ve only used the battery pack once, for a few days. It worked fine, but normally, I have mine plugged in. In any case, it’s worked well either way for me.

  13. This lamp is available in the UK as “Purelight” – and I can really recommend it as a good work light for embroidery. Very sturdy and bright. My only quibble is that I wish it had a clip-on lid to protect the lens when it’s not being used.

  14. I’ve had my Mighty Brite magnifying light for awhile now and it seems more dim. Because of this I’m looking at replacing it. So far, I’ve not found a supplier who sells the Dublin Craftlite. It looks like the company stopped responding to retailers late last year. I like the Mighty Brite as it doesn’t get hot, but this will be the third time I’ve replaced it in about 12 years. It seems to me that the maximum brightness lasts about 5-6 years. I guess for a light that averages about $100 that’s a fairly decent lifespan.

  15. Looking for a magnifier light – the Dublin sounds like the one that would work for me. Any idea if they’re still in business or been bought by Brightlite? Can’t find Dublin online anywhere. Can you suggest an alternative?
    Appreciate any leads!

    1. Unfortunately, I don’t think the Dublin is made anymore. I have not been able to find it. I like the Britelight ok, for an affordable magnifier, but I am hoping to upgrade to a Dazor one of these days, once I’ve saved enough pennies!

  16. Mary, I realize this review you did on the Craft Lite Dublin light/mag is well over a decade old, but I recently dragged mine out and somehow misplaced the AC adapter. If you still have this light and adapter, would you please take a picture of the adapter that shows all the electrical info and email it to me. If you don’t still have it, let me know that if you would.

    1. Hi, Cynthia, I don’t have the Dublin light right now – it’s on loan to someone – but you should be able to use a universal AC adapter that you’d use on a craft light or similar electrical item.

More Comments