About

Mary Corbet

writer and founder

 

I learned to embroider when I was a kid, when everyone was really into cross stitch (remember the '80s?). Eventually, I migrated to surface embroidery, teaching myself with whatever I could get my hands on...read more

Contact Mary

Connect with Mary

     

Archives

2024 (30) 2023 (125) 2022 (136) 2021 (130) 2020 (132) 2019 (147) 2018 (146) 2017 (169) 2016 (147) 2015 (246) 2014 (294) 2013 (294) 2012 (305) 2011 (306) 2010 (316) 2009 (367) 2008 (352) 2007 (225) 2006 (139)

Tool Time! New Use for an Old Tool, and Accessorizing

 

Amazon Books

Remember that telescoping magnet we talked about a few weeks ago?

That thing is So Dang Handy! If I didn’t convince you that you need one for needle-hunting-and-retrieving, let me show you a new use for it.

And dagnabit, it might even be a Better Use! Why I didn’t think of it earlier, I have no idea. All these years…

Telescoping Magnet Thread Holder

It makes a terrific thread holder!

I’ve been sorting and trying and comparing threads a lot lately, and the other day, I ran out of space for sorting.

If I only had some handy-dandy little peg arm thingy sticking out of the wall, where I could hang skeins to sort them, I said to myself.

And, lo! My magnet called to me. It said, Extend me. I’m awfully grippy. I can do it!

And, lo! It did do it!

And I’ve been using it to hang threads on ever since.

Of course, for this to work, you have to have the right kind of surface close by. I have the sides of my metal cabinets right next to me, so that works well. I also noticed that it sticks to the main shaft of my light. And it also sticks quite readily and almost a bit too eagerly to my Needlework System 4 stand, but I don’t like using it there, because there’s too much movement and I wouldn’t want to knock it off and end up with thread on the floor.

So there’s a new use for a telescoping magnet. Works in a pinch!

This week, I’m putting my mind to coming up with a simple dowel system to drape threads on. Nothing fancy – just a little something for stray threads while I’m working on projects. I have the picture of what I want in mind – if it comes off, I’ll share it with you.

Accessorize your Magnets!

And who would’ve thought you can even accessorize your magnets?

Telescoping Magnet Thread Holder

Marilyn sent in a photo of hers, with a case she made for it. She said she buys the telescoping magnets at hardware stores and makes cases for them using scrap needlepoint canvas and stash threads – and she gives them as gifts. Brilliant idea! Love the case!

That’s our Tool Talk for the week! Coming up later, a beautiful new book on the market (sorry to throw temptation in your way, but … it’s gorgeous), and the stitching gets underway on the Secret Garden project. I’m sure there’ll be a few other little tidbits in there, too.

Do you have any favored needlework tools that you repurpose and use for something other than their original intended use? Would love to hear about them! Feel free to share them with us in the comments below!

 
 

Leave a Reply to Shere'e in Seattle Cancel reply

Your email address will not be published. Required fields are marked *

*


(44) Comments

  1. Wow, fantastic re-purpose. You gave me another idea. We have metal doors with little windows at the top. We bought some magnetic curtain rods to hang a short curtain on them. It would also be great-both sides of the rod are supported. Probably more pricey than the picker upper though. Here’s a photo I found online but I think I got mine at the local big box store. http://www.curtainandbathoutlet.com/sidelight-mag-rod?c1=GAW_SE_NW&source=PLA_USA&kw=all_products&cr6=pla&cr7=c&gclid=CIes_YWmxLwCFQsSMwodlnsARA

    2
    1. Remember the 3 armed kitchen towel holders from the 1960’s and 1970’s. The arms could fold flat and out of the way or open in different positions to allow the towels to dry. This three armed towel rack if it can be found might be useful.

  2. You mentioned trying to set up a simple dowel system to hold your threads. I don’t know if this would work with your cabinets, but how about one of those swing-arm towel holders that are found under kitchen sinks? (They are generally metal, not wood.) They have 3 arms which swing out from the wall–you could triple your holdings!

    4
  3. Why not try one of those indoor laundry hangers. It collapses and easily stored.Just set it up as you need it or you can move it around without any trouble.

    5
  4. After reading about re-purposing things, the image that immediately came to mind for your “simple dowel system” was Tinker Toys! LOL!!

    Mary in MN

    6
  5. For sorting long hanks of thread, how about one of those scarf/tie hangers that has the multiple horizontal rods that swivel out?

    7
  6. Dear Mary

    Oh thanks so much for this what a good idea. I’m always have loose thread when I’m working on a project and constantly hanging thread ready for the next stitches and nowhere to put them I could hang this on my magnifier as I sew ready to use on the relevant project. I haven’t got one of these yet as I wasn’t sure if they were any use with carpet floors do you know if they are? but it would be worth buying one just to use as a thread hanger, great idea? Thanks for sharing this with us I do love your blogs on accessories.

    Regards Anita Simmance

    8
    1. The magnet works wonderful on carpet! It has saved my husbands feet more than once!! Lol! I do applique as well as embroidery and use those tiny little pins(sequin pins) and must run the magnet across the carpet before I quit for the night. I never seem to have a problem, but my husband always seemed to find the pins before I used the magnet. A must in my tool box!

    2. Hi Marie

      Thanks Marie for letting me know I ordered one yesterday can’t wait to receive it.

      Regards Anita Simmance

  7. My husband donated one of his telescoping magnets to my tool collection but it doesn’t stick to my Needlepoint System 4 stand. I’ve hung it from one of the knobs, though, and have used it many times since your recommendation a few weeks ago. As far as discovering a new way to hold yarns for projects, yesterday I purchased a rotating necklace tree by Umbra at Bed, Bath, and Beyond. It has 5 “stems” at different heights, each topped with a smooth wire “daisy.” The open “petals” serve beautifully to loop yarn through. You can hang similar shades on the same daisy to easily distinguish one from another. And, the petals are curved upward so you can un-loop the skein of yarn you’re currently using and drape it over the petal to easily separate each thread as you need it. Here’s a link to the Umbra website but you can find many links to other sellers: http://www.umbra.com/ustore/product/daisy-go-round-jewelry-stand.store

    9
  8. Remember those old wooden coffee cup trees? Those work GREAT for sorting threads. I find them at thrift stores all the time. I also just them when I wind bobbins for bobbin lace to keep my bobbins in order.

    10
  9. I need to get one of those magnets. I had a needle sitting on top of my thread case…and forgot it was there when i flung open the top of the case. We still haven’t found the needle!

    11
  10. It’s not a needle work tool, but I like to sort thread on a coat hanger for a project so there’s no tangling and when I’m not stitching I hang it and cover the thread with a clean hand towel. it makes it really easy to keep even the extra threads together and straight.

    12
  11. One suggestion for holding thread is a pasta drying rack. Many different configurations to choose from. I have a one that collapses that I actually use for noodles!

    13
    1. Susan and Mary, that was my thought too. I have a couple so I believe that I could spare one for threads instead of pasta!

      I had taken out one of my telescoping magnets and began looking around for a place to attach it in my workroom… Then I realized that I had opted for wood furniture and accessorites for my work room. I guess it is time to run to the store to pick up a smallish metal container to set on a shelf, and attach the magnet to that…

  12. Another idea for thread sorting is a folding 3 prong towel holder. It’s intended to be mounted on the cabinet door under the sink…it swivels out for drying. It could be mounted on a door, cabinet or wall…bet you could even attach a strong magnet and attach it to a metal surface.

    15
  13. Ikea makes the best rods for hanging things. My favorite is a vertical rod with short rods that screw in and stick out from it. Brushed nickel look and I have them all over the house including the stitching room. Another favorite is the one made for the laundry with 4 arms that can be pulled out in staggered positions and each arm is about a foot long. This can be wall mounted or bought on a floor stand.

    17
  14. That is genius, Mary. I would never have thought of doing that – very useful, thank you.

    I love the little case Marilyn has made as well.

    Thank you both for sharing.

    18
  15. Hi, Mary,
    I do most of my needlework sitting in my recliner in our relatively small family room. There’s no place to put a table of any sort next to my chair, and the markers, etc. that I use get knocked off the arms regularly if I put them there while I work. I do have a gooseneck floor lamp, however, which has a bracket into which a magnifier is inserted and the other hole in which I use to stash my scissors. The solution I found for the markers, pens, etc. (though not very good for metal tools) is a Pocket Plus Magnetic Pouch. This little pouch has probably a gazillion good uses! I stick it to the “stem” of the lamp. Nordic Needle carries the pocket, which comes in several sizes, but that’s not where I got it (and I paid less). I can’t access that info just now, but here’s a link to NN’s page for it http://www.nordicneedle.com/prod/6451C.html

    19
  16. Certain tie racks (that would get mounted in a man’s closet possibly) lend themselves very well. Some times the pegs will fold in out as needed.

    21
  17. This only works for very small projects, and I’ve not tried it with thread heavier than DMC floss, but I punch holes in those annoying cards that come in magazines and sort thread in those. If the strands are relatively short (no more than 18″) and you’re working with less than 10 colors, you don’t even have to loop or tie them through the hole, just threading the bundle through is sufficient to keep them separated and easy to pick up when you need a new color. I make a lot of small xstitch hardanger or beaded ornaments as gifts, and those projects typically only have 4 or 5 colors of floss.

    I love the pasta drying rack idea, tho. That’s a keeper.

    22
  18. I use swing arm curtain rods to hang ribbons and threads in use. Swing out when active and just swing back when not busy at work. No assembling of rod etc, for activity. They also have an adjustable length. They really are so perfect while coming in a variety of finishes, sizes, and prices πŸ™‚

    23
  19. Pulled up this example in case you might be interested Of course, this is a set so you could even have 2 projects set up at the same time…..or….a very extensive one. ! πŸ™‚

    Love your postings !!!

    14″ – 25″ Antique Brass Adjustable Swing Arm Curtain Rod Set By Versailles
    Bedbathstore.com
    All Products On Sale – Buy Now!
    $29.99

    25
  20. Lol! Ive been trying random odds and ends to hang my threads from too. I tried push pins in my cork board for a bit but the cats enjoyed those too much…

    26
  21. Since my cats think “what’s mine is theirs,” I keep the threads I am using in a basket so I can cover them up. Not convenient but I like the company they provide.

    27
  22. Since I stitch right by a window, I sometimes use a thin, round curtain rod, the kind with rubber tips and adjustable length, to hold threads.

    28
  23. It’s not a tool repurposed but something turned into a tool. I buy garage sale, flea market, and antique store metal cigarette cases and line them with adhesive-backed thin sheet-magnets that I cut to fit the case. I have one for each size and type of needle so I reach for the Dragon case when I need a size 24 tapestry needle (labeled on the back). I tried putting one size needle on one side and one size on the other but when you close the case, they have a party and switch sides! I even have one case that has the sticky goo for beads all on one side and then half on the other, with a strip of sheet-magnet to hold the beading needle and threader. Found all this stuff at the local craft store (except the cig cases)

    30
    1. Speaking of magnets, I have a couple of two Tesla rare earth magnets. They will lift the Universe if I let them — but they do pin and needle duty tucked into the toe of an old pair of pantyhose . Having had to pick up a whole box of pins from time to time has taught me the wisdom of sweeping over the floor then taking the magnets out of the hose – the pins pretty much drop in their box. When not in use they live on the underside of my ironing board or pot rack.

      I use Altoids type tins for needle cases and project boxes. The ‘mini’ ones hold needle threaders and a bunch of needles with a ‘puck’ magnet. The regular size ones get a strip of flex magnet and will hold a small pair of suture scissors, threads, laying tool and ripper… and whatever else I need that day.

      For ‘sticky sticks’ that can go on any smooth surface I have a handful of kids’ suction cup arrows. They are unfortunately appealing to the cat.

  24. A multi-pants hanger(4 arms) with swivel arms would also make a good thread holder. I can hang
    it on my stitching light! VJD

    32
  25. Check out the tools bobbin lacers use to manage pair-wound bobbins. Sometimes they are parallel dowels between uprights, sometimes they are a bit like umbrella ribs. Or look at Lehman’s Amish hardware store for wall-mounted towel racks.

    33
More Comments