About

Mary Corbet

writer and founder

 

I learned to embroider when I was a kid, when everyone was really into cross stitch (remember the '80s?). Eventually, I migrated to surface embroidery, teaching myself with whatever I could get my hands on...read more

Contact Mary

Connect with Mary

     

Archives

2024 (30) 2023 (125) 2022 (136) 2021 (130) 2020 (132) 2019 (147) 2018 (146) 2017 (169) 2016 (147) 2015 (246) 2014 (294) 2013 (294) 2012 (305) 2011 (306) 2010 (316) 2009 (367) 2008 (352) 2007 (225) 2006 (139)

Speeding Up Large Leaves in Long & Short Stitch

 

Amazon Books

Not last week but the week before (no, I’m not going to jump rope for you while chanting ditties – remember that one?), I made quite a bit of progress on Late Harvest, the finish of which is Looming!

And then I made no more progress on it at all.

And I still haven’t.

I had this weirdly naive plan to crank out the rest of the project this past weekend – I was so sure I could do it! – and then… nada. Not one stitch.

Still, week before last, I made some fair progress and I “discovered” a way to speed up the larger long and short stitch leaves.

Trust me, it’s no Grand Discovery that’s going to change your embroidery life. But it did help on these leaves!

Late Harvest - Long & Short Stitch Leaves

These are the types of leaves I’m talking about. They’ll eventually have a beaded vein down the middle, which will cover a multitude of little jiggly discrepancies in the center of the leaf. Of all the elements on Late Harvest, taken individually, these take the most time to stitch.

Way back at the beginning of the project (a gazillion years ago), we discussed the approach for stitching the long & short stitch leaves.

You can find the typical approach I follow with long & short stitch shading in this series of tutorials on long & short stitch. I’m an outside-in sort of gal, when it comes to long & short stitch. That is, I stitch from the outside of the motif to the inside. But the instructions for these leaves tell us to stitch from the inside to the outside.

It really doesn’t make much of a difference, as you can see from this article, where I worked one leaf one way and one leaf the other.

Late Harvest - Long & Short Stitch Leaves

My other habit when working long & short stitch filling is to split stitch the outlines first, and then stitch over the split stitch outline with the first layer of long & short stitch.

I contend that stitching over a split stitch outline (just as you would with a satin stitch filling) is your best bet for achieving a nice, smooth edge on long & short stitch or satin stitch or any similar filling.

But on these particular leaves, after they’ve been filled with long & short stitch, there’s an additional stem stitch outline stitched all around each leaf in a darker shade of the dominant colors in the leaf.

And this stem stitch outline goes a heck of a long way towards covering up any little jiggly discrepancies on the outside of the leaf.

Late Harvest - Long & Short Stitch Leaves

And so, being super determined to move through these leaves as quickly as possible, I made an executive decision: I totally skipped the split stitch outline.

Not only did it save me a good little bit of stitching time, but it made absolutely no difference in the finished leaves.

My next step: the beady veins down the middle of all those leaves, so that all the flaws are duly covered. I’m pretty sure that’s exactly the purpose of those beaded veins: to cover flaws!

The foremost leaf in the photo above (with the pinkish center) is a bit wonky down the middle, but that leaf sports a very wide beaded vein, so I decided to leave it rather than correct it. I love cover-up jobs.

And that, my friends, is exactly where I am on Late Harvest. I’d like to devote a hunk of time to it this weekend and get right to the finishing point. My goal for this project, remember, is to have it finished by mid-June.

But I’ll be superlatively happy if I finish it sooner!

Wish me luck!

Following Late Harvest

If you’d like to follow along with the progress on Late Harvest from beginning to end, you can find all the articles relating to this project listed in chronological order on the Late Harvest Project Index Page.

 
 

Leave a Reply to Christina Cancel reply

Your email address will not be published. Required fields are marked *

*


(11) Comments

  1. Good morning Mary! Hope you are feeling better. I am actually practicing on leaf shapes this past week, because I dread the long & short stitch!! I decided to work a stem stitch like you would the L&S stitch. I wasn’t sure how blending colors was going to do, but it worked out fine. After I was done one color I added some long and short stitches on top then went on to the next color. It worked out, but I didn’t like the colors I used, but was happy with the results. My problem is following the direction of I curved leaf, grrrrr,,,, the stem stitch has turned out to be my buddy. Sometimes it’s not only rewarding too think outside the box, but fun too ! Your Late Harvest is beautiful!

    2
  2. Dear Mary

    It’s good to hear from you and I do hope you are feeling better. You are certainly coming along with the Late Harvest project. Not putting in the split stitch at the beginning sounds as though it saved quite a bit time, the wonky line doesn’t notice at all it’s only when you pointed it out that I could see it. It’s looking lovely especially the beads. Good luck with the finishing of the project I do hope you reach your deadline by June I can’t wait to see the finished project.

    Regards Anita Simmance

    3
  3. Love your handwork. Many years ago I stopped using the long and short stitch to fill in leaves a and flowers. I use the fly stitch and it works out beautifully. I love using this technique doing butterflies.

    4
  4. Glad you are feeling well enough to get into the leaves, Mary.

    Do you mean that you would always skip the initial split stitch outline or just in this case because it has the extra row of stitching around the leaf after the long and short stitch? I often start the first row (outside in) with blanket stitch to give a nice finished edge but often wonder how necessary it is.

    6
    1. Hi, Christina – just in this case, where there’s an outline around the outside of the leaf, I don’t see any point in using the split stitch. The outline smooths the edges, if there’s any wiggly bits!

  5. Hello Mary, You definitely do not need to Split stitch the outer edge of a leaf or anything else if you are placing an edging line around. You are right: it does save a lot of time.

    Very glad that you are feeling better and are back home again. Do you plan a medical update sometime soon?
    I send love and good wishes for health and healing. There are a lot of people out here thinking of you and wishing you well.

    Ann B.

    7
  6. Hello Mary,

    That’s quite a time I’m reading your posts without commenting, but this time I do to say that here in France, for Long and Short Stitch we don’t put lines of stem stitches to begin with. We start the shading immediatly, from top to middle of design generally … I wanted to try once the “anglosaxon” way one day to see the differences but as you wrote not seeing any difference, I’m not sure I’ll have to bother the try, then … 🙂

    8
    1. Sorry, not stem but split stitiches …. Wrong one written …Still whatever stitiches, we don’t go first with any of them …

  7. Dear Mary;
    I have a slight problem and I am hoping you can help me. I had a friend who left me a box full of loose embroidery needles of various sizes.

    So, now I’m stymied, how do I size them?

    Thank you in advance for any help and advice you can offer.

    My best wishes to help you feel better as quickly as possible.

    9
More Comments